IAM-100 and Controller Manual
6209-9000 Rev 2
3
ALWAYS INCLUDE YOUR RMA #, ADDRESS, TELEPHONE NUMBER, CONTACT
NAME, SHIPPING/BILLING INFORMATION AND A DESCRIPTION OF THE
DEFECT AS YOU PERCEIVE IT. YOU WILL BE CONTACTED WITH A COST
ESTIMATE FOR EXPECTED REPAIRS PRIOR TO THE PERFORMANCE OF ANY
SERVICE WORK. FOR LIABILITY REASONS, BACHARACH HAS A POLICY OF
PERFORMING ALL NEEDED REPAIRS TO RESTORE THE INSTRUMENT TO
FULL OPERATING CONDITION.
PRIOR TO SHIPPING EQUIPMENT TO BACHARACH, CONTACT OUR OFFICE
FOR AN RMA # (RETURN MERCHANDISE AUTHORIZATION). ALL RETURNED
GOODS
MUST
BE ACCOMPANIED WITH AN RMA NUMBER.
PACK THE EQUIPMENT WELL (IN ITS ORIGINAL PACKING IF POSSIBLE), AS
BACHARACH CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE INCURRED
DURING SHIPPING TO OUR FACILITY. FAILURE TO INCLUDE A VALID RMA
NUMBER WILL RESULT IN LONGER PROCESSING TIME AND MAY ADD EXTRA
COST.
NOTICES
COPYRIGHTS: THIS MANUAL IS SUBJECT TO COPYRIGHT PROTECTION; ALL
RIGHTS ARE RESERVED UNDER INTERNATIONAL AND DOMESTIC
COPYRIGHT LAWS. THIS MANUAL MAY NOT BE COPIED OR TRANSLATED, IN
WHOLE OR IN PART, IN ANY MANNER OR FORMAT, WITHOUT THE WRITTEN
PERMISSION OF BACHARACH, INC.
ALL SOFTWARE WHICH BACHARACH UTILIZES AND/OR DISTRIBUTES, HOLDS
A PROPRIETARY INTEREST AND IS ALSO SUBJECT TO COPYRIGHT
PROTECTION AND ALL RIGHTS ARE RESERVED. NO PARTY MAY USE OR
COPY SUCH SOFTWARE IN ANY MANNER OR FORMAT, EXCEPT TO THE
EXTENT THAT BACHARACH GRANTS THEM A LICENSE TO DO SO. IF THIS
SOFTWARE IS BEING LOADED ONTO MORE THAN ONE COMPUTER, EXTRA
SOFTWARE LICENSES MUST BE PURCHASED.
TECHNICIAN USE ONLY
THIS UNIT MUST BE INSTALLED BY A SUITABLY QUALIFIED TECHNICIAN WHO
WILL INSTALL THIS UNIT IN ACCORDANCE WITH THESE INSTRUCTIONS AND
THE STANDARDS IN THEIR PARTICULAR INDUSTRY/COUNTRY. SUITABLY
QUALIFIED OPERATORS OF THE UNIT SHOULD BE AWARE OF THE
REGULATIONS AND STANDARDS IN THEIR INDUSTRY/COUNTRY FOR THE
OPERATION OF THIS UNIT. THESE NOTES ARE ONLY INTENDED AS A GUIDE
AND THE MANUFACTURER BEARS NO RESPONSIBILITY FOR THE
INSTALLATION OR OPERATION OF THIS UNIT.
FAILURE TO INSTALL AND OPERATE THE UNIT IN ACCORDANCE WITH THESE
INSTRUCTIONS AND WITH INDUSTRY GUIDELINES MAY CAUSE SERIOUS
INJURY INCLUDING DEATH AND THE MANUFACTURER WILL NOT BE HELD
RESPONSIBLE IN THIS REGARD.
Summary of Contents for IAM-100
Page 7: ...IAM 100 and Controller Manual 6209 9000 Rev 2 7 Figure 3 Sample Architecture Diagram ...
Page 14: ...IAM 100 and Controller Manual 14 6209 9000 Rev 2 Figure 6 Controller Housing ...
Page 34: ...IAM 100 and Controller Manual 34 6209 9000 Rev 2 ...
Page 35: ...IAM 100 and Controller Manual 6209 9000 Rev 2 35 ...
