Fyrite INSIGHT
21
5. Save the information by selecting Edit Complete.
Clearing a Username:
The CLEAR option will appear (above the F3 button) when an
entire line is selected. To delete all characters on the line, press F3
while the line is highlighted.
6. Repeat Steps 3-5 to edit remaining lines.
7. When all input is completed, select
Edit Complete
or
ESC
to can-
cel the edits and return to the Setup Menu.
Helpful Hint
: Use the Fyrite
®
user software to upload this informa-
tion from your computer.
3.7.11 Run/hold Format
Fyrite INSIGHT test data is displayed on the Run/Hold screen. The
RUN/hOlD
button is used to toggle between Run and Hold.
Press the
RUN/hOlD
button to start the pump. While it is running, the
word
Run
will appear in the upper-left corner of the display. The instru-
ment continuously measures and calculates the data displayed in the Run/
Hold screen.
When the
RUN/hOlD
button is pressed again, the pump will stop. The
word
Hold
will appear in the upper-left corner of the display. The instru-
ment will now show the last measured and calculated data taken before
the instrument was placed in Hold. Use the ▲▼ buttons to scroll through
the complete list of measured and calculated values when in RUN or in the
HOLD mode.
• Press ▲▼ buttons to scroll/highlight options.
• Press
(
ENTER
)
to select
or save.
•
Press
ESC
to go back.
Summary of Contents for 0024-8252
Page 54: ...Fyrite INSIGHT 50...