5
6
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
2)
•
NOTE:
The front tube is easily
distinguished from the rear tube
by the array of holes located on
the backside of the front tube.
Insert the left and right sides
Height bracket into the front
tube of the Upper Frame
Assembly as shown in (Fig. 2a).
•
Squeeze the Release Handles on
both sides simultaneously and
push the tube through the Height
Adjusters until it locks in the
highest position (Fig. 2b).
Fig. 2a
Fig. 2b
Upper Frame
Assembly
Upper Frame
Assembly
Height
Bracket
Front Tube
Front Tube
Release Handle
ATTENTION:
Carefully remove parts from box. Check that you have all the parts for this
model before assembling the high chair.
NOTE:
Certain High Chair models are packaged with the High Chair Seat Fabric and Seat
Insert already attached to the Seat Back.
TO ASSEMBLE SEAT
1)
• Locate the Right and Left Upper Frame
Assemblies and the Height Brackets
(Fig. 1).
PAIR UP TO JOIN:
• Pair the Right and Left Upper Frame
Assemblies with the Right and Left
Height Brackets as shown in the
illustration (Fig. 1).
Fig. 1
L
3)
• Insert the Legs into the ends of
the front tube of both the right
and left Upper Frame Assemblies
(Fig. 3).
NOTE:
Legs are properly
connected when the lock buttons
are lined up with the holes on
the ends of the Upper Frame
Assemblies. Make sure the lock
buttons are engaged before use.
4)
• Insert another Leg into the ends of
the rear tube of both the right and left
Upper Frame Assemblies (Fig. 4).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
Fig. 3
Fig. 4
Lock Buttons
Lock Buttons
