11
3. Removing the bumper bar
Press the small buttons on the seat unit under the
bumper bar and pull the bumper bar away from the
seat unit.
Note:
The bumper bar can be released one side at
a time to allow easy access for placing your child in
or removing your child from the seat unit.
4. Adjusting the seat unit.
Lift the adjustment handle on the top side of the
seat unit and adjust the seat to the desired position.
The seat unit will lock into position when the handle
is released.
Note:
The seat unit has 3 positions.
10
Section 2 - Seat Unit
1. Fitting the seat unit to the chassis.
Important:
Ensure that both the legs are in the same
position before attempting to attach the seat unit
to the chassis. Failure to do so may cause damage
to the seat unit.
Insert the seat unit legs into the main housings on
the chassis until the seat locks in place with a click.
WARNING: Ensure the seat unit is locked in place
on the chassis before use.
Note:
The seat unit can be used in forward facing
or parent facing modes. Simply attach the seat unit
in the same way in your preferred facing mode.
2. Fitting the bumper bar.
Slot the bumper bar into the sockets on the seat unit
whilst holding down the release button.
Important:
Ensure the bumper bar is locked in place
before use by pulling the bumper bar upwards.
‘CLICK’
Summary of Contents for EGG
Page 1: ...Instruction Manual...
