17
4. Fitting the carrycot.
Lower the carrycot onto the chassis parent facing.
Insert the carrycot legs into the main housings on
the chassis and push down firmly until it clicks and
locks onto the chassis.
WARNING: Ensure the carrycot is locked in place
on the chassis before use.
5. Removing the carrycot.
Depress the buttons on the side of the carrycot and
lift upwards from the chassis.
6. Fitting the carrycot raincover.
The carrycot hood must be fully extended to
support the Raincover. Place Raincover over the
carrycot and secure the side panels (left and right)
using the velcro tabs behind the main chassis
housings.
WARNING: Never leave raincovers, hoods,
aprons and baby nests on or over the stroller
indoors, in a hot atmosphere or near a heat
source, your child may overheat.
16
Section 3 - Carrycot
1. Assembling the carrycot.
Remove the apron and mattress to gain access to
the stay bars in the bottom of the carrycot.
Using the tabs, pull the stay bars into the clips on
the baseboard until you hear them click into place.
Reposition the lining and place the mattress back
into the carrycot.
Important:
Ensure that the stay bars are fully
engaged before using the carrycot.
2. Attaching the carrycot apron.
Fasten the zip of the apron to the zip on the
carrycot and pull all the way around.
3. Adjusting the carrycot hood.
Depress the buttons on the side of the hood and
pull up until you hear it click into place.
Depress the buttons again to put the hood down.
The carrycot hood has an intermediate position (45
degrees) to allow viewing when the carrycot is used
in the tandem mode, lower position.
‘CLICK’
‘CLICK’
Summary of Contents for EGG
Page 1: ...Instruction Manual...
