4.
When using a crib/bed equipped with spring base,
place extra wooden board (plywood) under each sensor
pad, as shown in illustration 3. The recommended size of
the board is at least 17’’ x 11’’ and 1/2’’ thick.
5.
Pass the cord(s) of the sensor pad(s) through special
openings in the holder (see illustration 4).
5
European Authorised Representative
OBELIS s.a [email protected]
Boulevard Général Wahis 53, 1030 Brussels, Belgium
Tel +(32) 2.732.59.54 Fax +(32) 2.732.60.03
Made by Hisense Ltd., an ISO 9001 and
ISO 13485 certified company.
23 Becker St., Rishon le Zion 7535929, Israel
Tel +(972) 3.956.66.04 www.hisense.co.il
Powered by 4 size AA, 1.5 volt batteries.
Power consumption approx. 1mA.
Battery life approx. 6 months using alkaline batteries.
Alarm volume typically 85dB SPL at distance of one
meter.
Size of sensor pad is 216 mm.
Babysense has a service life of 3 years from the date
of purchase.
Technical Specifications
Contents
Conditions of operation and storage
• Control Unit
• Control Unit Holder
• Optional Hanging Hook
• 2 Sensor pads
• 2 Cable Ties (tied around the sensor cables when supplied)
• User guide
Please note that the batteries are not supplied.
Conditions of operation are as follows:
Temperature: 0
°
C to 40
°
C
Relative humidity: 20 %RH to 80 %RH
Atmospheric pressure: up to 55kPa
Conditions of storage between uses are as follows:
Temperature: 0
°
C to 40
°
C
Relative humidity: 5 %RH to 95 %RH
Atmospheric pressure: up to 55kPa
Cleaning and Disposal
As necessary, the device (sensor pads and control unit)
may be wiped with a damp cloth.
The device and accessories are to be disposed of
according to local regulations after their service lives.
Alternatively, they can be returned to the dealer or the
manufacturer for recycling or proper disposal.
Babysense
requires no special treatment beyond
replacing batteries when the battery indicator light goes
on. The sensor pads and control unit may be wiped with a
damp cloth. Batteries should be removed and the device
stored in a dry shaded place when not in use.
Caring for your babysense
It is recommended to replace sensor pads two years
after their first use. Use only Babysense sensor pads.
V.BS7(UG).02.US.05.18
Other phenomena, symptoms, malfunctions – if you cannot find and solve the problem, please
contact us at www.babysensellc.com
This product is warranted to be free from defects in
material and workmanship for a period of (1) year
from the date of purchase, except as noted below.
BabySense LLC will repair or replace this product, at
our option, at no cost. This warranty does not apply to
product that has been damaged as a result of
improper maintenance or other misuse. This warranty
is also void if the owner repairs or modifies the
product in any way. BabySense LLC is not liable for any
incidental or consequential damage with regard to this
product. Warranty also excludes any liability other than
above. No other warranties are given. If you have a
claim under this warranty, do not return to the store.
Please contact BabySense customer service at:
Distributed by:
BabySense LLC
3910 Adler Place
Suite 115
Bethlehem, PA 18017
For additional information, please visit our website or
call the toll free number:
Website:
www.babysensellc.com
Toll free number: 1-877-780-3033
Limited 1 Year warranty