54
55
*The insert guides make it easier to install the child safety seat with the aid of the
ISOFIX attachment points and prevent damage to the seat covering. When not in
use, they should be removed and stored in a safe place. On vehicles with a folding
backrest the insert guides must be removed before the backrest is folded. Any
problems which occur are usually caused by dirt or foreign objects on the insert
guides and on the hooks. Clean of any dirt or foreign objects to remedy this type
of problem.
8.1 Group 0 +(0-13 kg) installed in the rearward facing position with 5 point
h vehicle belt
8.1.1 Pull the vehicle seat belt and pass the lap belt section through the red belt
guidance and under the sleeping cushion.
8.1.2 Pass the diagonal seat belt section through the blue guidance on the back of
the child seat.
8.1.3 Fasten the seat belt and pull it tight,ensure that the seat belt is not twisted.
Note:
1. The child seat must only be installed in
the rearward facing position and angle of
maximum inclination (Fourth level). For
be sure the car seat has been installed in
the right place,please shake it before use.
2. Don not twist the belt!
3. Ensure the buckle tongues engage in
the vehicle seat buckle,you will hear an
audible CLICK!
instruction
instruction
7.Instruction
Please read the chapter with your desired installation
method in chapter first.
0-36kg
1. If your vehicle is not equipped with the ISO-FIX insert
guides as standard, clip the two insert guides which are
included with the seat
* With the cut-out facing upwards onto the two ISO-FIX
attachment points of your vehicle.
TIP:
The ISO-FIX attachment points are located between
the surface and the backrest of the vehicle seat.
2. Move the head restraint on the vehicle seat to the
upper position.
3. Pull out the ISO-FIX adjuster to pull out both locking
arms,from the under of base pull the locking arm to and
fro until you hear a
CLICK
sound which indicates they
are fully engaged.
4. On both sides of the locking arms,the button turn into
green safety color.
* The insert guides make it easier to install the child
safety seat with the aid of the ISO-FIX attachment
points and prevent damage to the seat covering. When
not in use, they should be removed and stored in a
safe place. On vehicles with a folding backrest the
insert guides must be removed before the backrest is
folded.Any problems which occur are usually caused
by dirt or foreign objects on the insert guides and on
the hooks. Clean of any dirt or foreign objects to
remedy this type of problem.
insert guide
attachment
point
Click
instruction
instruction
7.Instruction
Please read the chapter with your desired installation
method in chapter first.
0-36kg
1. If your vehicle is not equipped with the ISO-FIX insert
guides as standard, clip the two insert guides which are
included with the seat
* With the cut-out facing upwards onto the two ISO-FIX
attachment points of your vehicle.
TIP:
The ISO-FIX attachment points are located between
the surface and the backrest of the vehicle seat.
2. Move the head restraint on the vehicle seat to the
upper position.
3. Pull out the ISO-FIX adjuster to pull out both locking
arms,from the under of base pull the locking arm to and
fro until you hear a
CLICK
sound which indicates they
are fully engaged.
4. On both sides of the locking arms,the button turn into
green safety color.
* The insert guides make it easier to install the child
safety seat with the aid of the ISO-FIX attachment
points and prevent damage to the seat covering. When
not in use, they should be removed and stored in a
safe place. On vehicles with a folding backrest the
insert guides must be removed before the backrest is
folded.Any problems which occur are usually caused
by dirt or foreign objects on the insert guides and on
the hooks. Clean of any dirt or foreign objects to
remedy this type of problem.
insert guide
attachment
point
Click
instruction
instruction
7.2 Group1(9-18kg) installed in the forward
facing position with 5 point ISO-FIX-
+vehicle belt
7.2.1 Make sure that the child seat’s 5-point
harness is installed correctly
7.2.2 Place the child seat facing in the
direction of travel on the vehicle seat.
7.2.3 Pull out the ISO-FIX locking arm from the
under of base.
7.2.4 Grasp the child seat with both hands and
slide the two locking arms into the insert
guides until the locking arms engage with a
CLICK
noise on both sides. The green safety
button must now be visible on both sides.
CAUTION!
The locking arms are only correctly
engaged if both of the safety buttons are
completely green.
7.2.5 Shake the child safety seat to make sure
it is safely attached and re-check the green
safety buttons to make sure that both of them
are completely green.
0-36kg
7.1 Group 0 +(0-13kg) installed in the
rearward facing position with 5 point harness
+ vehicle belt
7.1.1 Pull the vehicle seat belt and pass the lap
belt section through the red belt guidance and
under the sleeping cushion.
7.1.2 Pass the diagonal seat belt section
through the blue guidance on the back of the
child seat.
7.1.3 Fasten the seat belt and pull it tight,en-
sure that the seat belt is not twisted.
Note:
1.The child seat must only be installed in the
rearward facing position and angle of
maximum inclination(Fourth level).For be sure
the car seat has been installed in the right
place,please shake it before use.
2.Don not twist the belt!
3.Ensure the buckle tongues engage in the
vehicle seat buckle,you will hear an audible
CLICK!
Diagonal seat
belt section
Diagonal seat
belt section
Lap belt section
Lap belt section
