HOW TO USE COMB ATTACHMENTS
• To use comb attachments, turn the clipper to the ‘OFF’ position.
• Attach combs by holding them teeth up then snapping onto the
bottom of the clipper blade (figure 2).
• To remove comb attachments, pull out and up (figure 3).
ADJUSTABLE TAPER LEVEL
• The taper lever is positioned as shown in figure 1. You can hold the
clipper in your hand and adjust the lever at the same time while you
are clipping.
• The taper lever adjusts the closeness of the cut; from a close cut
with the taper lever in the up position - to a longer length cut with the
taper lever in the down position.
• There are 5 different taper positions to choose from. To increase
cutting length, slowly push lever down. To cut closer push the lever
up (figure. 1).
• Because a different cutting edge is used in each setting, using the
taper lever lengthens the life of your blades. Packed-in hair can slow
down any clipper. To remove hair without removing blades, keep the
clipper on, and quickly push the taper lever back and forth from close
to longer cut several times. If you do this every time, especially after
heavy hair cutting, the blades should remain free of hair.
• This quality hair cutting instrument has been manufactured with
extreme care. It has been thoroughly tested and inspected before
reaching the professional user. As with all precision instruments,
there may be a period of “breaking in”.
• If the speed of the motor varies, (as indicated in a change in sound
or pitch), it may be an indication of a fluctuation in line voltage. Refer
to the ‘Power Screw’ section in this booklet for more information on
how to maintain optimum performance.
• When the clipper is lubricated and adjusted in accordance with the
instructions, it will deliver ample power and speed for professional
hair cutting requirements.
IMPORTANT
Blades must be cleaned and oiled on a regular basis for
proper functioning. Failure to regularly clean and oil the blades will void
the warranty.
