background image

TEMPERATURE SETTING GUIDE 

There are 25 heat settings to select from (100°C-210°C) for styling 
various hair types. Use the table below as a guide to find the 
correct temperature for your hair category. Always start with a lower 
temperature and increase gradually if required.

OPERATING INSTRUCTIONS

• Plug the appliance into a suitable mains socket. 
• When the appliance is switched off the button off indicator light will 

be displayed.

• To switch the appliance on, press the ‘I’ key. The green and red 

indicator lights will flash intermittently while the styler heats up.

• There are 25 temperature settings to select from (refer to Temperature 

Setting Guide table above). For delicate, fine or coloured hair, use 
the lower heat settings. For thicker hair, use the higher heat settings. 
Always start with the lowest temperature setting and increase the 
level of heat as required.

• Use the dial selector to select the temperature required. The red 

and green indicator lights will flash until the required temperature is 
reached.

• The appliance is ready for use when the on indicator light remains 

green.

1-2

Ve

ry

 fine

, fr

agile 

hair

C

oloured or highlighte

d

 hair

Fine

, easy to cur

l hair

Normal tex

tured 

hair 

Naturally curly or wa

vy

 hair 

Thick,

 c

oarse 

hair

Sy

nthetic

 hair

3-5

6-9

10-14

15-19

20-22

23-25

Summary of Contents for CONICAL WAND BAB2280NBU









Reviews: