INSTRUCTIONS FOR USE
The precision trimmer is designed for accurate trimming and shaping
and comes with two comb guides for a choice of trimming lengths.
Preparation for Use
• Always inspect the appliance to ensure the precision trimmer head
is free from hair and running smoothly. Check also for signs of damage
and that the tips of the two blades are parallel. Failure to do this can
result in injury.
• Do not use any, lotions, creams before using the trimmer.
Trimming
• Attach the appropriate comb guide. To attach the comb guide make
sure that the appliance is switched off, put the comb guide over the
blades of the trimmer and push down on the lip at the back of the
comb guide until it clicks into place.
• We advise that you start trimming using the longest comb guide first.
Moving onto shorter guides as required.
• Switch the appliance on.
• Gently trim the hair against the direction of the hair growth.
• To remove the comb guide, ensure that the appliance is switched off.
Lift the lip at the back of the comb guide upwards and away from the
trimmer head.
Shaping
• For more detailed trimming and shaping remove the comb guide
from the trimmer head and very carefully trim the desired area, using
light pressure only.
• Switch the appliance off after use, clean and store away.
• Never switch the trimmer off whilst in the hair.
