BaByliss PRO BAB2269TTE, Manual

Page: 3 / 19

4 5
TITANIUM/TOURMALINE
TRIPLE-BARREL WAVER
22mm / 19mm / 22mm
FEATURES
• 3 Titanium Tourmaline
Technology heating barrels
22mm/19mm/22mm
• Temperature selector
(5 settings 140°C - 220°C)
• On/off switch (0/I)
• Velvet-coated handle
• Built-in metal stand
• Stay-cool tips
• Swivel cord
• Protective mat to prevent burns
to your surfaces when putting
the iron down
• Protective gloves
• 110W - 230V
TEMPERATURE CONTROL GUIDE
hAIR TYPE SETTING
damaged,
coloured or fine
140°C
average 160°C
thick 180°C
very curly 200°C
ethnic 220°C
Titanium-Tourmaline coating
Incomparable durability. Heat dis
-
tribution with perfect uniformity
and perfect heat stability for op
-
timum results.
USE
• Open the appliance by sliding the
lock button to UNLOCK position
• Plug the unit in.
• Turn the little wheel to select the
desired temperature for your hair
type (see temperature setting
guide). The wide temperature
range allows for completely safe
use on all hair types, even the
most sensitive or the most diffi
-
cult.
• Press the 0/I button. The indica
-
tor light will come on and stay on
during use.
• Protective gloves to be used Ba
-
Byliss PRO logo looking upward.
The left-hand finger shield wears
a “L” tag (Left); the right-hand
one wears a “R” tag (Right)
• Take up a section of hair, placing
the waver near the roots. Do not
get too close to the scalp.
• Close the plates over the section
holding them together lightly for
a few seconds according to the
hair type. Then place the clamp
lower avoiding the part already
waved. Continue down the
length of the section.
• Allow your hair to cool comple
-
tely before handling.
• For optimally long-lasting style,
we recommend using BaByliss
PRO hair products.
• After use, press the 0/I button to
turn off the heat. The indicator
light will go off.
• Once the unit has cooled, close
it by grasping the lock button
firmly and sliding it into the LOCK
position.
ENGLISh
WARNING
The barrels become very hot in a
few seconds and should not touch
the skin once the unit is plugged
in. The tongs become very hot
when it is set to the maximum
temperature. Always test on a sec
-
tion of hair to check that the set
-
ting is right for your hair.
CLEANING AND MAINTENANCE
Before removing any hair-
product residues left on the
wand:
• Check that the iron is turned off
and unplugged and that it has
cooled.
• Clean the iron using a damp cloth
and non-corrosive detergent or
soap. Before using again, check
that the appliance is dry.