background image

MAINS OPERATED CLIPPER

INSTRUCTIONS FOR USE

Oiling Instructions

IMPORTANT! 

 It is highly recommended before each use to oil the 

blades with the oil provided. This ensures optimum cutting performance. 
For the first use you will need to use the oil supplied with the product, 
unscrew the cap and cut off the very end of the plastic tube with a 
pair of scissors to release the oil. To oil the blades ensure the unit is 
switched on. Gently squeeze the oil tube and apply 2 drops of oil onto 
the blades. Leave the unit on for a further few seconds to allow the oil 
to thoroughly spread the length of the blades. Switch off the unit and 
remove any excess oil by gently dabbing with a cloth.

Comb Guides

This appliance is supplied with 6 comb guides. 

Cutting Length

Grade

3mm

#1

6mm

#2

9.5mm

#3

13mm

#4

19mm

#6

25mm

#8

•  To attach a comb guide, ensure the appliance is switched off. Slide 

the cutting blades of the clipper under the slot in the rear of the teeth 
of the comb guide and snap the clip on the bottom of the guide over 
the bottom edge of the fixed clipper blade.

•  To remove the comb guide, ensure the appliance is switched off. Push 

the tab on the rear of the comb guide away from the head and lift off. 

17_7448DGU_IB.indd   5

4/10/17   10:25 AM

Summary of Contents for 7448DGU













Reviews: