babyjogger City tour 2, Assembly Instructions Manual

Page: 11 / 24

11
EN
WARNING: Always use the crotch
strap in combination with the
shoulder straps and waist belt .
16 Slide the harness pads up to access
plastic guide on strap .
17 Hold the plastic guide and pull strap
to tighten or loosen .
USING SAFETY HARNESS
18 Insert side strap buckle into harness
buckle on both sides .
19 Insert connected harness and side
strap buckles into the sides of the
crotch buckle .
20 Press button on crotch buckle to
release .
RECLINE THE BACKREST
21 Pinch the clamp behind the
backrest, and slide it down to
desired position .
22 Pull backrest down on both sides to
match the clamp position . Reverse
steps to return to the upright
position .
WARNING: When making
adjustments to the stroller seat,
make sure child’s head, arms, and
legs are clear of moving seat parts
and stroller frame.
LEG SUPPORT INCLINE
23 Lift the leg support up in order to
raise it.
24 To lower the leg support, pull the
release bar underneath it and push
it down.
BASKET REMOVAL
25 From under the front of the stroller,
unfasten and unloop the four snaps.
26 Raise the calf support and undo the
fastening strip underneath the leg
support.
27 Pull the seat fabric off of the calf
support bar.
28 Unscrew the two screws on either
side of the calf support bar.
29 Pull the calf support bar up and out
of the grooves.
30 From underneath the stroller,
unfasten the snaps of the basket
near the rear of the stroller.
31 At the rear of the stroller, push up on
the hanging clips to remove them
from the stroller frame.
32 Pull the basket fabric out of the
channels in the footwell .
FOLDING
• Remove your child from the seat .
• Remove all attachments and all
items from basket.
33 Slide the handlebar fold release
button and hold it, then squeese the
fold button on the handle bar and
fold the handlebar forward.
34 Fold the upper stroller frame down
to the lower stroller frame.
35 Pull up on the strap on the seat and
let the frame collapse .
36 Make sure the auto-lock lever clicks
into place .
REMOVING THE SEAT FABRIC
37 From the underside of the seat,
unfasten the hook-and-loop and
slide the strap through the D-ring .
38 Unfasten and unloop the two snaps
underneath the seat.
39 Undo the fastening strip underneath
the leg support.
40 Undo the six fastening strips on the
back of the seat .
41 At the top of the seat, pull the seat
fabric out of the channels in the
frame .
WARNING: Make sure that all
fasteners are properly closed when
re-attaching the seat fabric.
EN EN