Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
FOLD / UNFOLD
12
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
11
INFANT CAR SEAT ATTACHMENT
WARNING:
Failure to
follow these car seat attachment
instructions could result in
serious injury or death.
12)
• Position the infant car seat so that it
faces toward the rear of the stroller.
Place the car seat so that it is cradled
on the inside of the front tray. Ensure the
car seat stoppers are resting on the tray
(Fig. 12a). When the infant car seat is
seated firmly into place, strap both short
clip over the infant car seat through the
seat belt slots on the infant car seat and
pull the strap adjuster tight (Fig. 12b).
NOTE:
It is very important that the short
clip is always tightly fastened around the
infant car seat.
Never use the car seat without the child
tray insert attached. Do not latch car
seat onto the child tray (Fig. 12a).
• To remove the Infant Car Seat, remove
both of the short clips from the seat belt
slots (Fig. 12b) and pull the Infant car
seat upwards (Fig. 12c).
TO FOLD STROLLER
WARNING:
Care must
be taken when folding and
unfolding the stroller to prevent
finger entrapment.
CAUTION:
Do not allow
children near stroller while
folding.
13)
• Close the canopy as described in the
canopy section.
• Place the seat in the furthest recline
position.
• Pull stroller backward several inches
to rotate the front wheels to the front
(Fig. 13a).
• To fold the stroller slide the thumb trigger
to the left and squeezing the pull trigger
while pushing forward on the handle
(Fig. 13b).
• Once the stroller begins to fold, release
the handle and push forward on the
handle until the stroller is folded. Lock
the release lever to secure the stroller
(Fig. 13c).
Fig. 13b
Fig. 13c
1
2
Fig. 12b
Pull
Pull
Fig. 12a
Fig. 12c
Fig. 13a
