ASSEMBLY
ASSEMBLY
3
4
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
IMPORTANT!
To ensure safe operation of your stroller,
please follow these instructions carefully. Please keep these
instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect
this product for damaged hardware, loose joints, missing parts
or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
Remove stroller from box. The front and rear
wheels
MUST
be installed prior to use.
FRONT WHEEL
To attach the front wheel, unfold stroller as
described in the following section:
1)
• Unlock the release lever (Fig. 1a).
• Unfold stroller frame by pulling backward
on the stroller handle (Fig. 1b).
• To attach the front wheel, lean the
stroller back so that it rests on the
handle with the front and rear legs
pointing upward. Position the front wheel
over the front leg tube so that the hole in
the housing lines up and will slide onto
the leg (Fig. 1c). Firmly push down until
the wheel lock securely into place.
NOTE:
Tug on the wheel to ensure it is
securely attached.
Fig. 1a
Fig. 1c
Fig. 1b
REAR WHEELS
Attach the rear axle assembly and wheels as
follows:
2)
• Position axle assembly over the rear leg
tubes, brake pedals facing back. At the
same time, push down applying equal
pressure to both sides until they lock into
place (Fig. 2).
NOTE: NEVER
use stroller if wheels do
not lock into place.
CHILD TRAY
3)
• To attach the child tray, push the angled
side of the tray onto the post at the
end of the right armrest while pressing
downward on the snap button, until
locking in place (Fig. 3a). Rotate the tray
downward until it latches onto the left
armrest into place (Fig. 3b).
CAUTION:
The maximum weight that
can be carried in the child tray is 3
lbs (1.36 kg).
Fig. 2
Fig. 3a
Fig. 3b
Fig. 3c
