Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
4
ASSEMBLY
WARNING
3
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING:
Please follow all of these instructions to
ensure the safety of your child. Keep these instructions for
future reference.
WARNING:
Failure to follow these instructions could
result in serious injury or death. Avoid serious injury from
falling or sliding out, always use the safety harness and
ensure that the children are properly positioned according
to these instructions.
WARNING:
Never leave children unattended.
WARNING:
Care must be taken when folding and
unfolding the stroller to prevent finger entrapment.
•
ONLY
approved
Snap Tech
TM
products can be used on the frame.
•
CAUTION:
This single stroller is designed for one child only. Use with more than one child
may cause an unbalance condition which can injure or harm your child.
• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance
of the stroller and cause a hazardous, unstable condition.
• The maximum weight that can be carried in the storage basket is 10 pounds (5.54 kg).
The maximum weight that can be carried in the parent tray is 3 pounds (1.36 kg).
Excessive weight may cause a hazardous unstable condition to exist.
• Be certain the stroller is completely opened and locked in place before allowing a child
near the stroller.
• Use of the stroller with a total weight more than 65 lbs (29.48 kg) will cause excessive
wear and stress on the stroller and may cause a hazardous unstable condition to exist.
•
NEVER
use the stroller on stairways or escalators.
•
NEVER
use the stroller with roller skates, in-line skates, skateboards or bicycles.
•
NEVER
allow your stroller to be used as a toy.
• To clean use only mild household soap or detergent and warm water on a sponge
or clean cloth.
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular
basis. Replace or repair parts as needed.
• Discontinue use of stroller should it malfunction or become damaged. Please contact our
customer service department to arrange for repair or obtain replacement parts.
Remove stroller from box. The front and
rear wheels
MUST
be installed prior
to use.
FRONT WHEELS
To attach the front wheels, unfold stroller as
described in the following section:
1)
• Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
• Lean the stroller backwards and push
each front wheel assembly into the front
wheel housing until they lock into place
(Fig. 1c).
NOTE:
Pull on the wheel assembly to
ensure that it is securely attached to the
stroller.
•
Remove Front Wheels:
Push release
button on the side of the wheel hub and
pull wheel assembly from hub (Fig. 1d).
IMPORTANT!
To ensure safe operation of your stroller, please
follow these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT!
Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. NEVER use if
any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
Fig. 1a
Fig. 1b
Fig. 1c
Fig. 1d
Release Buttons
