11
12
Raise the adjustable seat back to the
highest position by pressing in on the
Height Adjustment Button and lifting
upward on seat back. (Fig 12-1)
Unfold the Flex-Sides™ down and
fasten in place using the Velcro®
strips on the rear of the seat back
fabric and Flex-Sides™. (Fig 12-2)
4.1 Assembling the Car Seat
ADULT SET UP REQUIRED.
WARNING
PREVENT INJURY FROM PINCHING
– KEEP FINGERS CLEAR OF
HINGES WHEN ROTATING BACK
SUPPORT UP INTO USE POSITION.
KEEP CHILDREN AWAY FROM
CAR SEAT DURING SET UP AND
ADJUSTMENT.
Check to make sure that all parts and harness
belts are properly in place. (Fig 11-1)
While pulling Harness Adjustment Strap
away from seat, lift and unfold back
support until it locks into place.
Note: You should hear a “click” when
the locks are fully engaged. (Fig 11-
2) Always confirm that both Fold Lock
Levers are engaged before use.
Check to make sure that the
Harness Adjustment Strap is not
trapped inside the seat as shown.
(Fig 11-3)
4.0
Preparing Car Seat for Use
4.0
Preparing Car Seat for Use
11-1
12-1
12-2
11-2
1
1
2
11-3
1
2
Summary of Contents for FastBack
Page 42: ...81 82 Note Note...
