background image

35

34

6.0

 INFANT RESTRAINT

USING INFANT RESTRAINT

6.1  Securing your Child in the Safety Seat / Carrier

In a crash, the safety seat provides no protection for your child 

unless the Harness Straps are properly installed according 

to these instructions.  Make sure that the harness straps are 

properly adjusted and secured whenever using the Safety Seat, 

even when using as a carrier.

Please follow these instructions carefully to properly secure your 

child.

1.  Check that the Harness Straps are installed in the proper slots 

or adjusted to the proper height as described in section 5.9, 

Adjustment of the Shoulder Straps

, preceding.

Failure to properly secure your child in the Safety Seat / 

Carrier increases the risk of death or serious injury from 

suffocation or falls, or in the event of a sharp turn, sudden 

stop or crash.

WARNING

2.   The clothing you dress your child in will 

affect the proper use of the Safety Seat.  

Please dress your child in clothing that will:

• Allow the Harness Straps to securely latch 

between your child’s legs.

• Keep the shoulder straps properly located 

on your child’s shoulders.

3.   Place the Safety Seat on a firm and level 

surface.  Move the carry handle to the non 

rocking position.  Loosen the Harness Straps 

by pulling on the straps while pushing on the 

Harness Adjuster Button located below the 

pad just in front of the buckle.  Unfasten the 

Harness Chest Clip.  Unbuckle the Harness 

Straps and drape the Harness Straps over 

the Seat back or to the sides of the Safety 

Seat.  (Fig. 35-1)

4.   Place your child in the Safety Seat so that 

the child’s bottom is against the back and 

bottom of the seat.  (Fig. 35-2)

5.   Pull the harness straps down over your 

child.  Check that the harness straps are not 

twisted.

Fig. 35-1

Fig. 35-2

Correct

Incorrect

6.0

 INFANT RESTRAINT

Summary of Contents for EZ FLEX-LOC




























Reviews: