Copyright © 2007 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2007 - 2010, Baby Trend Inc., All Rights Reserved.
5
6
Fig. 8
REAR WHEEL
Lean the stroller forward to rest on the front
wheel. To attach the rear wheels, push each
wheel's axle into the plastic corner fitting as
shown in Fig. 8. Depress the metal lever on the
inside of the corner fitting as you push the axle
into corner fitting. When the wheel will not go
on any farther, release the lever. Check that the
wheel has locked into the corner fitting by pulling
on the wheel. If not locked, lift upward on the
lever, push the wheel on farther and release lever.
Ensure that the wheels are firmly locked
into place.
NEVER
use the stroller if the
wheels are not locked into place, contact our
customer service department immediately at
1-800- 328-7363, between the hours of 8:00am
and 4:30pm PST, for assistance.
PARENT TRAY
To attach the parent tray, align the fittings on the
ends of the parent tray with the fittings on the
outsides of the handle. Hook the hole in the parent
tray. Pull outward on the opposite end while
pushing down on the tray until locked onto the
stroller handle. Please be careful not to pinch your
fingers when installing the parent tray. (Fig. 9) To
remove the parent tray, pull outward on one end of
the tray while lifting upward.
WARNING:
Do not place
hot liquids or more than 3 pounds
in the parent tray. Serious burns or
unstable conditions could result.
CANOPY
To open the canopy:
push forward on the front
edge of the canopy while holding the rear of
canopy in place. (Fig. 10)
To fold the canopy:
pull backwards on the front
edge. (Fig. 11)
ASSEMBLY
CHILD TRAY
(if equipped)
To attach the front child tray: Insert the tray
clipinto the fitting on the stroller’s fold joint.
Check the tray clip locks into place. (Fig. 12a)
Push the angled tray onto the post at the end of
the right armrest, while pressing downward on the
snap button, until locked into place. Rotate the
tray downward until latched onto the left armrest.
Please check that the snap button comes through
and securely latches the tray in place. (Fig. 12b)
To open the front child tray:
press inward on left
side tray release button and rotate upward on the
tray. Please see figure 12c. Please note that you may
remove the tray completely by depressing the buttons
on each side while pulling forward on the tray.
PEDOMETER
(if equipped)
The pedometer is located in a separate box inside
the main box. Slide the pedometer onto the
provided mounting bracket as shown in
Fig. 13. Instructions on how to use the pedometer
are included in the separate box. Caution: When
folding the stroller, please make sure to rotate
the pedometer inside towards the parent tray to
prevent damage when folded.
INFANT CAR SEAT
(if equipped)
To attach the Baby Trend Infant Car Seat, recline
the seat all the way back.
WARNING:
Never jog or
run with your newborn in the car
seat position. Use for strolling only.
• Position the Infant Car Seat, facing toward the
rear of the stroller, so that the seat shell goes
into the front tray and latches into place. (Fig.
14)
Check that the Infant Car Seat is firmly
locked onto the front tray before using.
ASSEMBLY
Fig. 9
Fig. 10
Fig. 11
Open
Close
Fig. 13
Fig. 12a
Fig. 12b
Fig. 12c
Fig. 14
