7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
56
5. Close Harness Clip and position as
close to arm pit level as possible.
6. Check that the Harness Straps are
snugly adjusted.
- Check that harness straps are snug on
child’s shoulders and thighs.
- The harness strap is properly tightened if
you are not able to insert more than one
finger between the harness strap and
the child’s shoulder or thigh.
- A snug harness strap should not allow
any slack. It lies in a relatively straight line
without sagging. It does not press on
the child’s flesh or push the child’s body
into an unnatural position.
55
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
4. Snugly adjust harness.
Each Shoulder belt Adjuster has a green
Tension Indicator that will be visible when
the shoulder belt is tensioned properly. Pull
on the Harness Adjuster Strap until the
green Tension Indicator on the Shoulder
Strap Adjuster is visible.
See “Adjustment of the
Harness Straps” section for
more information on tightening
and loosening the harness.
To tighten harness:
While holding onto Harness Strap
Adjuster pull down on Harness
Adjuster Strap to snugly adjust
harness strap until green Harness
Strap Tension Indicator is pulled
up and visible.
Repeat on the other harness
strap to snugly adjust harness
straps.
Green Harness
Strap Tension
Indicator
Harness
Adjuster
Straps
