Baby Trend EuroSport Owner'S Manual Download Page 41

Page: 41 / 48

10.0

Operation and Adjustments

The harness can be adjusted to three different heights. The proper

height of the harness straps is at or just above your child’s shoulders. If

your child’s shoulders are between two levels, always use the higher of

the two. Remove the body insert if your child’s shoulders are above the

highest set of harness slots.

Follow the instructions very closely to ensure that the harness is

properly adjusted to fit your child at all times. Check the fit of the

harness every time you use the Car Seat.

To remove Harness Strap:

To adjust the height of the Harness Straps,

  remove Harness Straps from Back Support,
  a. Adjust the harness to loosen Harness Straps.
  b. From the front of Back Support, slide top

corners of Back Support pad off Back

Support exposing harness slots in Back

Support.
c. From back of car seat, pull the metal

harness retainer on the Harness Straps

away from the back of the Back Support.
d. Rotate the metal harness retainer and

harness strap to position the narrow side

of the metal harness retainer into the

harness slot.
e. Push the metal harness retainer through

the harness slot opening in the Back

Support and seat pad.
f. Pull the harness strap and metal harness

retainer out through the front of the seat pad.

10.0

Operation and Adjustments

To re-attach Harness Strap:

Re-attach the Harness Straps at the required

height by securing the Harness Straps into the

harness straps slots in the Back Support,
a. Rotate the metal harness retainer and

Harness Strap to position the narrow side

of the metal harness retainer into the

harness slot in the pad.
b.

Slide the metal harness retainer through

the harness slot opening in the seat pad.
c. Slide the metal harness retainer into the

harness slot opening in the Back Support.
d.

Pull the metal harness retainer through the

seat support, position the metal harness

retainer flat against the back surface of the

Back Support and pull on the harness to

remove all slack.
e. Check that the metal harness retainer is

flat against the surface of the Car Seat
Repeat above steps for second Harness

Strap. Be sure both metal harness retainer

are properly positioned flat against the

Back Support and the Harness Straps

are not twisted.
f. Slide back support pad over top corners

of Back Support.

Summary of Contents for EuroSport

















































Search results

Summary of Contents for EuroSport

Reviews:

Related manuals for EuroSport

Brands by name

Popular brands

Baby Trend EuroSport, Owner'S Manual

Search results

Summary of Contents for EuroSport

Reviews:

Related manuals for EuroSport

Brands by name

Popular brands