background image

2

Trend Nursery Center

 

Read all instructions 

BEFORE

 assembly and 

USE

 of Playard.  

KEEP 

INSTRUCTIONS FOR FUTURE USE

.

      

WARNING: 

FAILURE TO FOLLOW THESE WARNINGS 

AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS 
INJURY OR DEATH FROM ENTRAPMENT, STRANGULATION, 
SUFFOCATION, ETC.  

    

WARNING:

 

INFANTS CAN SUFFOCATE: IN GAPS 

BETWEEN A MATTRESS TOO SMALL OR TOO THICK AND 
PRODUCT SIDES, ON SOFT BEDDING. NEVER ADD A MATTRESS, 
PILLOW, COMFORTER, OR PADDING. USE ONLY THE MATTRESS 
PROVIDED BY MANUFACTURER.

•    IF REFINISHING, USE A NONTOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

• 

DO NOT

 LEAVE CHILD IN PRODUCT WITH SIDE LOWERED.

•  BE SURE SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD IS IN PRODUCT.

•  The Playard, including side rails, must be fully erect prior to use.  

Make sure locks are secure.

•  Discontinue use of the Playard when child is able to climb out or reaches the height of 35 inches (890 mm) 

or the weight of 30 lbs.. (14 kg)

•  When child is able to pull to a standing position, remove bumper pads, large toys, and other objects that 

could serve as steps for climbing out.

•  Never leave your child unattended.             

•  Strings can cause strangulation! 

DO NOT

 place items with a string around the child’s neck, such as hood 

strings or pacifier cords.  

DO NOT

 suspend strings over a Playard/crib or attach strings to toys.

• 

DO NOT

 place the Playard near a window where cords from blinds or drapes can strangle a child. 

DO NOT

 

add padding or other objects inside the Playard that will permit your child to climb out. Keep Playard away 

from stoves, heaters, campfires and other hazards.

•  Never use plastic shopping bags or other plastic film as mattress covers not sold and intended for that 

purpose.  They can cause suffocation.

•  Before each usage or assembly, inspect product for damaged hardware, loose joints, missing parts, or sharp 

edges.  

DO NOT

 use Playard if any parts are missing or broken.  Please contact Baby Trend Customer 

Service for replacement parts, repair or instructional literature if needed.  

DO NOT

 substitute parts.

•   To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless 

otherwise advised by your physician.

•    Always provide the supervision necessary for the continued safety of your child.  When used for playing, 

never leave child unattended.

• 

DO NOT

 use a water mattress with this product.

•  This product is not intended for commercial use.

MAINTENANCE AND CLEANING INSTRUCTIONS: 

*Use only household soap or detergent and warm water.  *NO BLEACH.

Please:  If  you  experience  any  difficulty  with  the  use  of  our  product  or  have  a  question  regarding  these 

instructions, please contact our Customer Service Department at (800) 328-7363 between the hours of 

8:00 a.m. and 4:30 p.m. Pacific Standard Time. Please do not return the product to the store as once it is 

returned it cannot be re-sold and the materials and energy used to make it are wasted.

To Contact Us:

Baby Trend, Inc.   

 

 

 

Customer Service Hot Line

1567 S. Campus Ave. 

 

 

 

(800) 328-7363

Ontario, CA 91761    

 

 

 

8:00 a.m. to 4:30 p.m. Pacific Standard Time

12.04

Summary of Contents for 8136BCC












Reviews: