Baby Trend 8136BCC, Instruction Manual

Page: 4 / 11

WARNING:
All top rails MUST be
straight and locked in position or child may
become entrapped and suffocate.
See figure 9 and 10.
5. Place mattress in Playard with padded side up (Fig. 11).
NOTE: DO NOT insert mattress if using bassinet feature. Go to
bassinet instructions.
6.
Feed the 6 Velcro straps (found underneath the mattress), 3 on each
end of the mattress pad, through the slots on the bottom of the sides
of the Playard. Fasten the Velcro tabs to the underside of Playard to
prevent the mattress from moving (Fig. 12) (Fig. 13).
WARNING:
To prevent child from
suffocating, Velcro straps MUST be secured
to underside of Playard.
7. Attach the organizer, to any side of the playard, by pushing the plastic
clips down over the top rail. (Fig. 14). The maximum weight capacity
of the organizer is 3 pounds.
8. To operate the brakes on the wheels, press downward on the brake
lever as shown in figure 15. To release, lift upward on the lever.
Playard assembly is now complete and ready to use.
4
Figure 5
Left
Right
Figure 6
Left Figure 5 Right
Insert
axle from
outside Insert
axle from
outside
Outside Inside
Figure 7 Figure 8
Figure 9
Figure 10
Figure 11 Figure 14 Figure 12 Figure 13 Figure 15