background image

NOTE:    Playard 

MUST 

be  in  a  locked  set-up  position  before 

installing and using the bassinet feature.

CONTENTS (Fig. 1):

2  Right corner supports
2  Left corner supports
1  Nylon bassinet insert
2  Long metal tubes
2  Medium metal tubes
2  Short metal tubes

ASSEMBLY

1.  Insert 1 short tube into a medium tube lining up the snap button and 

the hole opening.  Make sure the snap buttons are exactly fitted into 
the holes (Fig. 2).  Repeat for the second set of tubes.

2.  Unroll  the  nylon  bassinet  fabric.    Insert  one  set  of  the  connected 

tubes into each long side of the bassinet sleeve (Fig. 3).

NOTE:    The  printed  warning  label  should  be  facing  toward  the 
inside of the bassinet and is readable.

 
3.  Insert 1 long tube into the short side of the bassinet sleeve.  Repeat 

for remaining side. 

4.  Slide the corner supports onto the ends of each tube (Fig. 4).  The 

corner support with a hole is used for the mobile.  Place this corner 
support on the end opposite the changing table.

 

The  bassinet  canopy  is  secured  to  the  bassinet  with  snaps  on  the 
outside sleeve. Snap both on the ends of the canopy to the sleeve as 
shown in (Fig. 4a). The rear section of the canopy is connected to 
the bassinet sleeve as shown in (Fig. 4b).

5.  Place assembled bassinet onto the Playard.  Push down each of the 

corner supports (Fig. 5).

NOTE:  The corner supports are designed to rest on long side of 
Playard (40 in. rail) and wrap around the short side of the Playard 
top corner pieces.

6.  Place  the  Playard  mattress  into  the  bassinet  with  the  padded  side 

facing up (Fig. 6).

7

TO ASSEMBLE YOUR BASSINET

Figure  5.

Figure 1

Figure 2

Figure  3.

Figure  4.

Figure  6.

Figure  4a.

Figure  4b.

snap

bassinet

Summary of Contents for 8136BCC












Reviews: