06
07
www.babylove.com.au
www.babylove.com.au
4. TO ATTACH THE FRONT WHEELS
A
Slide the front wheel assembly on to the front leg of
the stroller. Ensure that the larger hole on the swivel
housing is pushed on first (with the swivel lock lever
toward the top). Push until the wheel clicks into
position. Gently pull on the front wheel assembly to
ensure it is correctly engaged. Repeat the procedure for
the other front wheel assembly.
B
To remove the front swivel wheels, depress the tab
located under the front swivel post and slide the
wheels off.
B
A
3. TO ATTACH THE FOOTREST
A
Align the footrest as shown over the two holes.
Press the pins into the mouldings. Secure on the
underside with the caps provided.
A
A
5. TO LOCK THE FRONT SWIVEL WHEELS
A
To prevent the front wheels from swivelling on uneven
or rough surfaces, push down on the swivel lock on
each pair of front wheels.
Pull up on each swivel lock again to unlock the front
swivel wheels.
6. TO ADJUST THE LEG REST
A
To adjust the leg rest, lift up the end of the seat until it
locks into place. To lower the leg rest, press the lever on
both sides of the leg rest and then lower it.
A
A
7. TO ATTACH THE CANOPY
A
Attach the canopy to the stroller by pushing the clips
into the moulding as shown. Also attach the upper part
of the canopy to the stroller with the hook and pile loop.
B
Attach the canopy backflap to the hook and pile located
behind the seat.
C
Remove the canopy by pulling with some upward force
on the clips and undo the hook and pile loop.
A
Lever
