04
09
www.babylove.com.au
www.babylove.com.au
1. ASSEMBLING THE STROLLER
A
Release the storage latch on the side of the
stroller frame.
B
Pull the frame up until the frame locks at the rear of the
frame partly open.
C
Press down on the centre of the frame lock with your
foot until it locks into place.
A
B
C
10. TO OPERATE THE BRAKES
NOTE: THE REAR BREAKS ARE DESIGNED TO BE
ACTIVATED WITH YOUR FOOT.
A
Lightly step on the brake lever of the right-side rear
wheel and push it down to engage. The left-side brake
will also engage via the cable link. Gently push the
stroller forward to ensure brakes are fully engaged.
B
To release the rear brakes lift the right-side brake lever
upward.
WARNING: ALWAYS APPLY REAR BRAKES WHEN
PARKING THE STROLLER.
A
B
WARNING: USE THIS HARNESS AT ALL TIMES.
A five-point harness is provided to restrain your child. To
secure the child in the harness, push buckle (A) and (B) into
the buckle housing (C) until the buckle prongs snap into
position. Carefully adjust the harness by pulling the slider
(D) until the desired fit is achieved in the lap, shoulder and
crotch straps. Always adjust the harness when changing
the seating position of the child. To release the buckle,
squeeze the top and bottom prongs.
11. TO SECURE YOUR CHILD IN THE HARNESS
