Baby Lock Spirit BLPY Instruction And Reference Manual Download

Page: 93 / 184

ADJUSTMENTS DURING THE EMBROIDERY PROCESS

Em
br

oide

Embroidering

E-27

If the Thread Breaks During
Sewing

Press the “Start/Stop” button to stop the
machine.

If the upper thread is broken, redo the

upper threading. If the bobbin thread is

broken, press

and follow the

directions in steps

through

from the

previous section to reset the bobbin.

Press .

Press , , ,

move

the needle back the correct number of
stitches before the spot where the thread
broke.

If you cannot move back to the spot where the

thread broke, press

to select the color and

move to the beginning position of that color, then

use , , ,

move

ahead

to slightly before where the thread broke.

Press

to return to the original screen.

Press the “Presser Foot Lifter” button to
lower the presser foot, and press the
“Start/Stop” button to continue sewing.

Summary of Contents for Spirit BLPY

























































































































































































Search results

Summary of Contents for Spirit BLPY

Reviews:

Related manuals for Spirit BLPY

Brands by name

Popular brands

Baby Lock Spirit BLPY, Instruction And Reference Manual

Search results

Summary of Contents for Spirit BLPY

Reviews:

Related manuals for Spirit BLPY

Brands by name

Popular brands