Baby Lock Spirit BLPY Instruction And Reference Manual Download

Page: 137 / 184

EDITING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-71

Press .

→

The “Saving” screen is displayed. When the data is
saved, the display returns to the original screen
automatically.

■

Recalling the Custom Thread Table
data from USB media

You can recall a custom thread table data from USB
media.

Insert the USB media containing the custom
thread table data into the USB port.

USB port

USB media

Press

and then press

Press .

→

The “Saving” screen is displayed. When the data is
loaded to the machine, the display returns to the
original screen automatically.

The recalled custom thread table is
displayed on the screen.

Note

• Do not insert or remove USB media while

“Saving” screen is displayed. You will lose
some or all of the data you are saving.

Note

• Do not store two or more “.pcp” data file in

USB media. You can only recall one custom
thread table data at a time.

Note

• Do not insert or remove USB media while

“Saving” screen is displayed. You will lose
some or all of the data you are saving.

Summary of Contents for Spirit BLPY

























































































































































































Search results

Summary of Contents for Spirit BLPY

Reviews:

Related manuals for Spirit BLPY

Brands by name

Popular brands

Baby Lock Spirit BLPY, Instruction And Reference Manual

Search results

Summary of Contents for Spirit BLPY

Reviews:

Related manuals for Spirit BLPY

Brands by name

Popular brands