![background image](http://html1.mh-extra.com/html/baby-lock/pro-stitcher-lite-blps-liteg-vf/pro-stitcher-lite-blps-liteg-vf_installation-manual_3402420021.webp)
20 | Pro-Stitcher Lite for the Baby Lock Gallant/Villa Frame
www.ProStitcher.com
Set Up Pro-Stitcher Lite
1. Plug one end of the machine encoder (Y) cable
into the round connector on the side of the
machine near the machine encoder and the other
end into the machine encoder (
see figure 1
).
2. Plug one end of the carriage encoder (X) cable
into the round connector at the rear of the
machine and the other end into the carriage
encoder (
see figure 2
).
3. Plug the 9-pin 90-degree female connector
(see
Parts List, item P)
into the 9-pin connection near
the back of the machine (on the side where the
top-tension assembly thread is) and the other
end into the Pro-Stitcher Lite tray assembly (
see
figure 2
).
4. Plug the power cord
(see Parts List, item J)
into
the back of the Pro-Stitcher Lite tray (
see figure
3
).
Â
IMPORTANT
: Do not plug the power cord
into the wall outlet until all connecting cords
have been plugged in.
communication
cable
communication
cable
cable
carriage
encoder
power
machine
encoder
cable
figure 1
figure 3
figure 2