background image

Pro-Stitcher Lite for the Baby Lock Gallant/Villa Frame

Installation Instructions  |  15

Villa Frame Table Top Installation Instructions

Parts List

PART NUMBER

DESCRIPTION

QTY

QF01501-RAW

4-Foot Table Top Section

2

QF00043

Double-sided Foam 118 inches

1

Tools Needed: 

•  Scissors for cutting foam tape (not included)

 

Â

IMPORTANT

: Removing the frame poles 

will make it easier to place the table-top 

sections.

 

Â

IMPORTANT

: Before installing table-top 

sections, confirm that guide rails and tracks 

are in the correct position, by placing the 

machine and carriage on the tracks and 

rolling it from end to end, checking for 

smooth movement and no binding.

1.  Cut the double-sided foam tape to fit the 

crossbar supports and apply the adhesive side of 

the foam tape to all six cross-bar supports. 

2.  Remove the protective cover from the tape on 

the three crossbar supports on the right side of 

the frame. 

3.  Remove the clear backing from the smooth 

bottom side of both table tops. The textured 

side goes up.

4.  Starting at the right vertical brace, butt the end 

of one table-top section against the brace and 

align it between the guide rails. Make sure the 

table-top section is between the front and rear 

guide rails and does not overlap the lip of either 

guide rail. Do not press the section down into 

the foam tape until both table-tops are in place.

5.  Remove the protective cover from the foam 

tape on the three remaining crossbar supports.

6.  Butt one end of the second table-top section 

end against the end of the installed table-top 

section and align between the rails. When 

correctly positioned, press the table-top 

sections firmly onto the foam tape.

PART NUMBER: QF01501

vertical 

brace

guide

 

rails

crossbar 

supports

table-top section

table-top section

Summary of Contents for Pro-Stitcher Lite BLPS-LITEG-VF





































Reviews: