Page 8
4.
Carefully lift the quilting machine and place it on
the carriage so the wheels engage the white carriage
tracks, making sure not to set the wheels on top of
the stitch regulator cable (this is easier to do with
two people – one at each end of the
quilting machine).
5.
With one end of the stitch-regulator cable
plugged into the machine’s C-Pod and the middle
connector plugged into the quilting machine’s “Y”
encoder, plug the other end of the cable into the car-
riage “X” encoder (
Figure 10
).
6.
The black cables attached to the Pro-Stitcher
carriage should be routed up between the rear han-
dles and the quilting machine, toward the right-hand
side of the machine (looking at the machine from the
back). Place the black cable clips (
Page 3, J
) as shown
in
Figures 11a, b & c
, and route the cable accord-
ingly.
Figure 10
Stitch
regulator
cable
Figure 11 a
Figure 11 b
Figure 11 c