Page 65
This procedure resolves the issue of the touch screen
being activated at a point inconsistent with where
the stylus is being pressed. It may be necessary to use
a USB mouse if the calibration is too far off.
1. From the Pro-Stitcher “Main Menu”, press the
“Setup” button.
2. Press the “Advanced” button at the bottom of the
screen.
3. Press the “Advanced Machine” button.
4. Press the “Touch Screen” button.
5. The screen will turn white and a black cross hair
will appear at the top left-hand corner of the screen.
(
Figure 71 on next page
)
Procedure for Calibrating the Touch-Screen Monitor