MACHINE SETTINGS
Stitch type: 1/4” Narrow Left Cover Stitch-ONLY C1-C2
Stitch type: 5/8” Narrow Left Cover Stitch-C1-C2
Wide Cover Stitch-C1-C3
Stitch type: 1”
Wide Cover Stitch-C1-C3
Triple Cover Stitch C1-C2-C3
Narrow Left Cover Stitch C1-C2
Sewing speed:
Moderate to slow
Stitch length:
3-4
Upper looper:
Down
Cutting blade:
Disengaged “LOCKED”
Sewing table:
On
Application: Hem straight edges of projects.
Fabrics: 1/4 inch Feller - lightweight denim, chambray,
cotton broadcloth, calico, polyester, and rayon.
Note: Will not work with polar fleece or sweatshirt fleece.
5/8 inch & 1 inch Feller - lightweight denim, chambray,
broadcloth, calico, ultrasuede, leather.
Note: Will work with two layers of lightweight polar fleece
with no seams.
Note: When using BLCS-2 or BLCS the accessory adaptor
BLCS-AA is needed.
Single Downturn
Feller
1/4 inch (6.5mm) (BLE8-S10)
5/8 inch (16mm) (BLE8-S8)
1 inch (25mm) (BLE8-S9)
Instructions
Attachment Instructions: Make sure the attachment is in the
front and the center screw positions of the mounting bracket to
avoid being too close to the toe of the presser foot.
1. Secure the attachment to the table with guide fixing screws.
2. To start the hemming, finger press under 1/4 inch for 3-4
inches.
3. Feed the fabric (right side up) through attachment and pull the
fabric to the needles and under the presser foot.
4. Make sure the fabric is still folded when placing under the
presser foot.
5. Keep fabric turned under when feeding into the attachment to
ensure the fabric will roll under when sewing.
This single downturn feller turns the fabric downward into
a perfectly straight single turn hem. You won’t have to
press your hems before using this feller, making downturn
hems easy.
www.babylock.com
