www.babylock.com
COVERSTITCH:
MACHINE SETTINGS
Stitch type:
Triple Cover Stitch or Wide Cover Stitch
Needles:
Triple Cover Stitch-C1,C2,C3 Wide
Cover Stitch-C1,C3
Stitch length:
4
Stitch width:
M
Differential feed: Normal
Upper knife:
Disengaged “LOCKED”
Sewing table:
Remove knife cover and snap on sewing
table
Sewing speed:
Slow
INSERTING FISHING LINE uSING THE ELASTIC FOOT:
MACHINE SETTINGS
Stitch type:
3-Thread Rolled Hem
Needle:
02
Stitch selector:
D
Stitch width:
5.0
Stitch length:
1.5R (Rolled hem setting)
Differential feed: 0.6
Upper knife:
Engaged "Unlocked"
Sewing speed:
Slow
1. Thread your serger for a 3-thread rolled edge using
decorative threads in the upper looper.
2. Slide the fishline through the guide holes on the right side of
the elastic foot and then under the back of the foot leaving a
3" to 4" tail in the back.
3. Snap the foot on the machine and place the fabric under the
foot with the fishline to the right of the needle.
4. Begin serging making sure the fishline is caught in the
stitching as the edge is being rolled.
5. When you have finished serging, carefully remove the fabric
and fishline from under the presser foot being careful not to
pull the fishline out of the seam.
elastic tape
tension adjuster screw
Elastic Foot
(BLE8-EF)
Instructions
(continued)
