CARE AND MAINTENANCE
328
*
Make sure that the indicated points are aligned
before installing the bobbin case.
i
Insert the tabs on the needle plate cover
into the needle plate, and then slide the
cover back on.
Cleaning the Bobbin Case
Thread wax and dust easily collect around the
notch in the tension spring on the bobbin case,
resulting in an incorrect thread tension. Therefore,
the bobbin case should be cleaned as necessary
should tension problems arise.
When cleaning the bobbin case, use card stock or
another type of paper of similar thickness and
sturdiness in order to prevent pieces of paper
tearing off and getting lodged in the bobbin case.
a
Follow steps
a
to
f
in “Cleaning the
Race” to remove the bobbin case.
b
Using a piece of paper of adequate
thickness and sturdiness, slide the paper
between the tension plate base and the
tension spring and also slide the paper
behind the notch of the spring to remove
any dirt or dust.
a
Tension plate base
b
Notch
c
Paper (e.g. business card type)
d
Tension spring
c
Use the cleaning brush to remove any lint
and dust from inside the bobbin case.
d
Replace the bobbin case and needle plate
cover.
CAUTION
•
Never use a bobbin case that is scratched;
otherwise, the upper thread may become
tangled, the needle may break, or sewing
performance may suffer. For a new bobbin
case (part code: XE5342-101 (green marking
on the screw), XC8167-551 (no color on the
screw), XE8298-001 (gray, for bobbin work)),
contact your nearest authorized retailer.
•
Make sure that you fit the bobbin case
properly, otherwise the needle may break.
Note
• If the needle plate has been removed it is
especially important to reinstall the needle
plate and tighten the screws prior to
installing the bobbin case.
Memo
• Do not bend the tension spring. In addition,
do not use anything other than recom-
mended paper to clean the bobbin case.
Summary of Contents for Ellisimo GOLD BLSOG
