Baby Lock Ellegante2 BLG2-NZ, Instruction And Reference Manual

Page: 184 / 268

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
172
Automatically Resuming
Embroidery When the Power
Goes Off
The current color, stitch number and design
position are saved when the power is interrupted
during embroidering. The next time that the
machine is turned on, you can resume
embroidering.
a
Turn the main power to ON.
b
Follow the instructions shown on the screen
and remove the embroidery frame.
→
The following message will appear.
c
Attach the embroidery frame and press
.
→
The previous sewing screen displayed before the
machine was turned off appears.
d
Press the “Start/Stop” button to continue
embroidering.
a
Stitch number when embroidery is resumed
Memo
Even if the power goes out in the middle of
embroidery, the machine returns to the point
where embroidery was stopped when the
machine is turned on again.
Note
• Do not remove the embroidery unit or the
memory will no longer remember your
design.
Memo
If you want to start a new operation, press
so the pattern selection screen
appears.
a