Baby Lock Ellegante2 BLG2-NZ, Instruction And Reference Manual

Page: 106 / 268

SEWING THE STITCHES
94
c
Attach presser foot “J”. Align the center of
the presser foot with the middle of the
space between the fabrics and begin
sewing.
a Basting stitches
d
When sewing is finished, gently tear the
paper away.
Tape or Elastic Attaching
a
Select a straight stitch and attach presser
foot “J”.
b
Set the stitch length to 4.0 mm (approx.
3/16 inch), and loosen the upper thread
tension to 2.0 (See pages 49 through 50).
c
Sew two rows of straight stitches on the
right side of the fabric, then pull the bobbin
thread to create the necessary gather.
d
Place the tape over the gather, and hold it
in place with basting pins.
a
Tape
e
Select or .
f
Sew over the tape (or elastic).
g
Pull out the straight stitch threads.
Memo
Use a thick thread.
Memo
Be sure that neither automatic reinforcement
nor automatic thread cutting is
selected.
Memo
Before sewing the straight stitch, rotate the
handwheel and pull up the bobbin thread.
Holding the top and bobbin thread, pull a
length of thread out from the rear of the
machine. (Be sure that the presser foot is
raised.)
a
Memo
For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.
CAUTION
Be sure the needle does not strike a basting pin, or
any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
a