8
Installing Machine
on Carriage
1.
Place the carriage on the table rails ensuring that the carriage
stitch regulator assembly is toward the back of the table (
Figure 1)
.
2.
The stitch regulator, machine and carriage are connected by a
ribbon cable that has 3 connectors (
Figure 3, page 9
). The machine
should arrive from the factory with the ribbon cable already attached
by Connectors A and B. The remaining end, Connector C, will be
connected in Step 4.
Figure 1
Back of
table
Carriage
Stitch
Regulator
Assembly
(X-Motion)
Front of
table
IMPORTANT NOTE:
Very carefully remove the plastic wire
tie securing the Carriage Stitch Regulator Assembly (X-
Motion)
after
the carriage is placed onto the tracks of the
quilting frame
(Figure 2)
.
Figure 2
Plastic Wire Tie