![background image](http://html1.mh-extra.com/html/baby-ktan/brezee-baby-carrier/brezee-baby-carrier_owners-manual_462291008.webp)
GETTING STARTED
Follow these steps to get started with your Baby K’tan Baby Carrier
6
The Hip Position
does not require the
“Getting Started”
steps below.
1
Put both loops together to
form a circle.
2
Put both loops over your
head like a necklace (with
support band at the back of
your neck).
6
The outer loop will now be
hanging at your waist, and
the inner loop will still be
lying diagonally across your
torso.
3
Separate the loops . Place
one arm through one loop,
and the other arm through
other loop.
4
Carrier should now cross (“X”)
at your front and your back,
with support band in the
middle of the X at your back.
5
Take the outer loop (the one
farthest from your body) and
lower it from your shoulder.
The Baby K’tan is made of two loops of fabric
connected by an adjustable back support band.
After placing one arm through
each loop, the “X” might fall near
your neck; simply take a moment
to pull it down so that the “X”
falls at the center of your front
and back.
Helpful Tip