8
Manual: OMS-Nano Remote-Switch for 10Micron Mounts
Under
Relays-No. 2
the second relay (labelled "I/O Switch" on the OMS-Nano) can
be freely programmed for future applications.
If you already want to use the second relais now, we can provide the documentation,
if you contact us at [email protected]. Please note that the warranty is
void once the housing is opened or the second port is reprogrammed. These altera-
ions are done at your own risk.
Completion of the work
After each change of the settings, the switch box must be switched off and on again to
successfully complete the programming. After changing the IP address and a restart,
the OMS-Nano can be reached under the new IP address. Please remember to make
the necessary changes to the bookmarks as well.
Likewise, the IP-4 details in the network settings can be reset to the original values if
necessary.
BAADER PLANETARIUM
Zur Sternwarte 4 • D-82291 Mammendorf • Tel. +49 (0) 8145 / 8089-0 • Fax +49 (0) 8145 / 8089-105
www.baader-planetarium.com • [email protected] • www.celestron.de
G
M
B
H
© Baader Planetarium GmbH. All Rights reserved. Products or instructions may change without notice or obligation.
Images and illustrations may differ from the original products. We reserve the right of errors. Reproduction of this
instruction manual, complete or in parts, only with written permission by
www.
baader-planetarium
.com
