© Baader Planetarium GmbH
7
Under the menu item
Network
, you can now make all the necessary changes to your
own network. However, it is recommended to use a fixed IP address as far as possible.
Please note:
If changed settings have not yet been transmitted to the switch box, the
Update Pen-
ding
button lights up red. In this case, wait until the button button turns grey again.
Under the menu item
Relays
, all necessary settings for the functions of the two relays
can be made.
Under
Relays-No. 1
the preset values for the control of the mount can be viewed.
Do
not change these values!
Relay 1 is activated by pressing the
10 Micron Pulse
button.
