6
TABLE 5: Plumbing Connections
Connection
Position from
Floor
(mm)
Position from
Rear of Appliance
(mm)
Position from
LHS/RHS edge
of Appliance
(mm)
Water Inlet (W)
Gas Inlet (G)
½” Copper
600(+/-5)
125 (+/-5)
100(+/-5) RHS
¾” male BSP
500(+/-5)
125 (+/-5)
100 (+/-5) RHS
Water Outlet/Waste (D)
2” BSP
620 (+/-5)
825 (+/-5)
110 (+/-5) LHS
IMPORTANT WARNINGS
THIS APPLIANCE SHALL ONLY BE INSTALLED/SERVICED BY AN
AUTHORISED INSTALLER.
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE
SPECIFIED INSTRUCTIONS AND SPECIFICATIONS.
IMPROPER INSTALLATION OR OPERATION OF THIS APPLIANCE
MAY RESULT IN PRODUCT FAILURE WHICH MAY LEAD TO
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
CAUTION MUST BE TAKEN WHEN OPERATING THIS APPLIANCE
TO MINIMISE RISK OF FIRE. THE APPLIANCE MUST NOT BE
LEFTON UNATTENDED.
REGULAR INSPECTIONS BY AN AUTHORISED SERVICE PERSON ARE STRONGLY RECOMMENDED TO
ENSURE PROPER AND SAFE FUNCTIONING OF THIS APPLIANCE.
AFTER ANY SERVICING OR ADJUSTING OF GAS CONNECTED COMPONENTRY, GAS LEAK TEST MUST BE
CARRIED OUT TO ENSURE THERE ARE NO GAS LEAKING HAZARDS.
NEVER STORE ANY FLAMEABLE LIQUIDS/VAPOURS IN VICINITY OF THIS APPLIANCE. NEVER SPRAY
AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
ENSURE ANY TRANSIENT PROTECTION IS REMOVED BEFORE INSTALLING THE APPLIANCE ENSURING
ANY POSSIBLE DAMAGE TO THE APPLIANCE OR COMPONENTS/ PARTS THAT MAY HAVE BEEN
SUSTAINED DURING TRANSPORTATION IS REPORTED TO THE MANUFACTURER.
THIS APPLIANCE IS NOT INTENDED TO BE USED IN A MARINE ENVIRONMENT. ENSURE APPLIANCE IS
INSTALLED IN A STABLE POSITION.
FAILURE TO FOLLOW THE INFORMATION PROVIDED IN THIS BOOKLET WILL VOID THE B&S WARRANTY
AND MAY RESULT IN DAMAGE TO EQUIPMENT OR INJURY TO PERSONNEL.
Please note that checking and adjusting of burner pressures on commercial catering appliances is an obligation of
gasfitters.
The relevant legislation is as follows from the
Plumbing Regulations 2008
administered by the
Victorian Building
Authority:
Gas fitting work defined
(1) Gas fitting work is the construction, installation, replacement, repair, alteration, maintenance, testing or
commissioning
of any pipe,
appliance
, flue, fitting, apparatus, control or other item that is involved with the
supply or use of gas and that is fitted downstream of the outlet of a customer billing meter or a consumer's
gas storage container
As per
AS/NZS5601.1
, clause 6.11.1, this gas appliance must be
commissioned
by a suitably authorized person
who;