B.PRO Food Distribution Carts SAW/SAG/BTW9x7
– 29 –
Help in the event of problems
Operation indicator LED does
not illuminate
Operation indicator LED
illuminates, but Bain-Marie basin
or unit compartment remains cold
Operation indicator LED
illuminates, but food is not
sufficiently temperature
maintained
Corrosion of stainless steel parts
Remove the areas of corrosion.
Section “Removing areas of corrosion on stainless steel” on page 33.
The unit has external damage
Shut the unit down.
Chapter “Shutting down” on page 27.
Secure the unit from being started up accidentally.
Notify a facility authorized to carry out repairs.
Cause
Action
Power plug is not plugged in.
Plug the power plug into the electrical
outlet.
Power plug is damaged; a wire
is broken, for example (can also
occur without external dam-
age).
Have power plug replaced by a facility
authorized to carry out repairs.
Customer-accessible fuse
(household fuse) is defective.
Check the customer-accessible fuse
and replace it if necessary.
Unit’s electronic system defec-
tive.
Notify a facility authorized to carry out
repairs.
Cause
Action
Unit’s electronic system defec-
tive.
Notify a facility authorized to carry out
repairs.
Cause
Action
Temperature setting set too
low.
Set higher temperature.
Section “Setting the
setpoint temperature” on
page 16.
Unit’s electronic system defec-
tive.
Notify a facility authorized to carry out
repairs.
Summary of Contents for SAW 1
Page 47: ......
