rod is fastened to the upper and lower pivot plates by two
6mm Allen bolts and lock washers.
Fig. 22
. As a final check
before attaching your trailer, make sure these bolts are
securely tightened.
To tighten properly, insert a 5mm Allen wrench in each
screw (top and bottom) and tighten against one another
simultaneously.
B.O.B QUICK RELEASE INSTALLATION
Fig. 23
shows the anatomy of a B.O.B quick release. Study
this diagram carefully and become familiar with the names
of the various parts. This will assist you in understanding
the following instructions. The B.O.B quick release must
first be fitted to your bicycle before the trailer can be at-
tached. The quick release installation procedure is as follows:
17
FIG. 21
Tighten COZ front fork pivot screw in the upper and lower pivot.
FIG. 23
Anatomy of a B.O.B Quick Release (QR).
FIG. 22
Tighten YAK front fork pivot screws in the upper and lower pivot.
Retaining
Screw
Adjusting Nut
Rod
Conical
Spring
Lever
Bobbin
Flat
Washer
Lock
Washer
Summary of Contents for COZ
Page 1: ...OWNER S MANUAL AK Y AK Y...
