Tire pressure -
It is CRITICAL that the rear tire of your bicycle
is inflated to the normal operating pressure embossed on the
sidewall of the tire. Under-inflated tires cause wash-out of the
rear wheel and an unstable riding condition for the bike and
trailer. Tire pressure for the wheel on your trailer is embossed
on the side wall of the tire. Tire pressure can be adjusted to
offer differing degrees of suspension and rolling resistance.
NOTE:
Inflation pressure must always fall within the range
embossed on the sidewall of the tire.
COZ Reflector Installation -
The COZ comes with wheel and
rear fender reflectors. The wheel reflector is pre-installed. The
installation of the rear fender reflector is covered under fender
assembly.
YAK Reflector Installation -
The YAK comes with two types
of reflectors; a rear fender reflector and wheel reflectors. The
15
FIG. 18
Wheel reflector.
FIG. 17
Wheel reflector correctly positioned.
installation of the rear fender reflector is covered under
fender assembly.
Every YAK comes with two spoke reflectors which
mount onto the spokes of the trailer wheel. It is best to
mount the reflectors 90 degrees from the valve stem
Fig.
17
. The reflectors should be installed by weaving them
through the spokes. The reflectors attach to the spoke with
the white slotted attachment “screw”,
Fig. 18
. Remove
attaching screw from reflector. Place reflector in position
between wheel spokes and centered on a spoke approxi-
mately 90 degrees from valve stem. Install screw,
Fig. 18
,
over spoke and into receiving hole of reflector. Using a
screwdriver, turn screw 90 degrees clockwise to lock
reflector in position. Repeat the above steps for the second
reflector to be installed opposite the position of the first
Summary of Contents for COZ
Page 1: ...OWNER S MANUAL AK Y AK Y...
