RFM-LR1
User Manual v1.1
CID
Command
Transmitted by
Short Description
0x02
LinkCheckReq
End device
Used by an end device to validate its connectivity to
a network.
0x02
LinkCheckAns
Gateway
Answer to LinkCheckReq command. Contains the
received signal power estimation indicating to the
end device the quality of reception (link margin).
0x03
LinkADRReq
Gateway
Requests the end device to change data rate,
transmit power, repetition rate or channel.
0x03
LinkADRAns
End device
Acknowledges the LinkRateReq.
0x04
DutyCycleReq
Gateway
Sets the maximum aggregated transmit duty cycle
of a device
0x04
DutyCycleAns
End device
Acknowledges a DutyCycleReq command
0x05
RXParamSetupReq
Gateway
Sets the reception slots parameters
0x05
RXParamSetupAns
End device
Acknowledges a RXSetupReq command
0x06
DevStatusReq
Gateway
Requests the status of the end device
0x06
DevStatusAns
End device
Returns the status of the end device, namely its
battery level and its demodulation margin
0x07
NewChannelReq
Gateway
Creates or modifies the definition of a radio
channel
0x07
NewChannelAns
End device
Acknowledges a NewChannelReq command
0x08
RXTimingSetupReq
Gateway
Sets the timing of the of the reception slots
0x08
RXTimingSetupAns
End device
Acknowledges RXTimingSetupReq command
LoRa MAC Commands
The RFM-LR1 can be controlled over by sending down link commands.
The following MAC commands per LoRaWAN specification 1.0.2
Contact Info
B METERS srl
Via Friuli, 3 • Gonars 33050 (UD) • ITA
LY
Te
l: +39 0432 931415
Fax: +39 0432 9926
61
E-M
ail (sales/info): [email protected]
E-mail (support): [email protected]
Web: www.bmeters.com
