Fixture Relamping
PROJECT:
TYPE:
RELEASE DATE
08/02/2021
REFERENCE NUMBER
INS-2826-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
This product is available with field replaceable components. Exclusive interchangeable OPTIKITS and modular
LED components with quick disconnects simplifies upgrades and maintenance when necessary.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS
5. Remove retainer
4. Twist and pull away optic.
10. Connect new driver assembly to fixture leads.
Place connections inside body cavity, then
slide down fixture body along guides.
6. Disconnect driver assembly from fixture body.
7. Separate heatsink from driver assembly via
quick disconnect.
8. Remove protective plastic from the double-
sided tape square on clean top of driver
assembly.
9. Reconnect heatsink assembly to driver
assembly via quick disconnect. Quick
disconnect tucks into space underneath
heatsink. Press heatsink down along guides
until flush and even with tape on driver.
11. Reinstall Retainer
1. Remove faceplate from collar using (2) #8-32
faceplate screws with a 9/64” allen wrench.
2. Remove fixture from collar.
3. Loosen three (3) #8-32 set screws with a
5/64” allen wrench to remove cap from fixture
body.
INTEGRAL DENALI SERIES UPLIGHT
Surface Mount Installation
