40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
RELEASE DATE
01/27/2021
REFERENCE NUMBER
INS-2832-00
Integral Driver Replacement
3. Remove retainer
2. Twist and pull away optic.
1. Loosen three (3) #8-32 set screws with a
5/64” allen wrench on cap, then remove cap.
8. Connect new driver assembly to fixture leads.
Place connections inside body cavity, then
slide down fixture body along guides.
4. Disconnect driver assembly from fixture body.
5. Separate heatsink from driver assembly via
quick disconnect.
11. Install cap by tightening three (3) #8-32 set
screws with a 5/64” allen wrench. Do not over
tighten.
10. Twist to reinstall optic onto optic holder.
6. Remove protective plastic from the double-
sided tape square on clean top of driver
assembly.
7. Reconnect heatsink assembly to driver
assembly via quick disconnect. Quick
disconnect tucks into space underneath
heatsink. Press heatsink down along guides
until flush and even with tape on driver.
9. Reinstall Retainer
LINE UP WITH THE HOLE
Installation Instructions
DENALI SERIES
INTEGRAL DRIVER - TWIN SIGN STAR
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS
