40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
RELEASE DATE
01/27/2021
REFERENCE NUMBER
INS-2832-00
10. Thread aircraft support cable through
cable notch in stem. Loop and fasten with
compression fitting. Use proper crimping tool
to close compression fitting.
9. Thread aircraft support cable through support
canopy cable notch. Loop and fasten with
compression fitting. Use proper crimping tool to
close compression fitting.
Installation Instructions
DENALI SERIES
INTEGRAL DRIVER - TWIN SIGN STAR
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS
Fixture will not support itself. Structural support cable must be installed in the field.
7. Use a 3/16” allen wrench to loosen (1) 1/4”-28
x 1-1/4” stainless steel black oxide socket head
cap screw at the knuckle for vertical aiming
purpose.
Tighten (1) 1/4”-28 x 1-1/4” stainless steel black
oxide socket head cap screw to 24” minimum
to 48” maximum pounds to secure vertical
aiming position .
5. Rotate fixture at base and aim fixture to
desired horizontal location.
6. Tighten (1) 3/8”-16 x 3/8” stainless steel
black oxide set screw on the stem to secure
horizontal aiming position.
4. Use a 3/16” allen wrench to slightly loosen
(1) 3/8”-16 x 3/8” stainless steel black oxide set
screw on the stem for 360° aiming purpose.
Warning: Do not over tighten set screw.
Doing so will compromise O-ring seal and
will void warranty.
Knuckle Adjustment
