17
Checking the Meter Display
Each time you enter a new battery, all segments of the display will
appear for 3 seconds. The numbers displayed later are only meant
for internal tests of the electronics.
The following picture shows all possible display segments, so that
you could check that the display is working properly.
16
Change the battery when the battery
icon
appears on the display or when
the meter does not power on by any
means.
The meter needs only one 3V Li CR2032
battery. One battery is provided with
the
Omnitest
®
plus
meter system. When
changing battery, pay attention to the
polarity, which is printed in the battery
holder of the meter. The plus of the bat-
tery has to face up.
If the new battery is inserted, at first all
segments of the display will be shown.
Thereafter an internal check of the elec-
tronic takes place in the following
seconds.
Correct the date and time setting after
the battery change.
Battery